Uniden BCT15 사용자 설명서
78
[MENU]
Program System
F
Select a Motorola Type I, II or EDACS Wide/Narrow system
F
Edit Sys Option
F
Emergency Alert
F
Off — the scanner does not alert you to emergency transmissions.
Alert 1 - 9 the scanner sounds an alert beep to notify you of the emergency
transmission. The default alert is Off. You can choose any of 9 different beep
types. Once you choose an alert tone, next:
Set Level
F
Auto — the scanner automatically sets the emergency alert beep to the master
volume level.
Level 1 - 15 — the scanner adjusts the volume you hear to the level you select.
Assigning a Conventional System to a State
In addition to the BearTracker System Preprogrammed State information, you may
want to program another system in that same state. Then, when you turn on that
state using the [STATE] and the Scroll Control, the system you program will also
be enabled and scanned. See “Assigning a Trunked System to A State” after
“Setting Site location Information”
want to program another system in that same state. Then, when you turn on that
state using the [STATE] and the Scroll Control, the system you program will also
be enabled and scanned. See “Assigning a Trunked System to A State” after
“Setting Site location Information”
[MENU] Program System
F
Select an existing Conventional system type
F
Edit Sys Option
F
Set State
F
Rotate the Scroll Control to the same state as the system’s state.
[MENU]
Program System
F
Select an EDACS Wide/Narrow system
F
Edit Sys Option
F
EDCS ID Format
F
Setting the Emergency Alert Option
ME
Conventional Systems
C
Setting the EDACS ID Format
E