Uniden BCT15 사용자 설명서
86
[MENU]
Program System
F
Select a trunked system
F
Edit Site (current)
F
Select a site
F
Set C-Ch Only
F
This setting determines the frequencies you need to enter for Motorola systems.
Select your setting, then press
Select your setting, then press
F
.
On — You only need to enter control channel frequencies.
Off — You must enter all voice and control channel frequencies.
Note: The scanner defaults to On.
[MENU]
Program System
F
Select a trunked system
F
Edit Site (current)
F
Select a site
F
Set LocationInfo
F
This setting control whether the system is automatically enabled and disabled
when you connect a GPS to the scanner.
when you connect a GPS to the scanner.
Set Latitude — Enter the system’s latitude using the format you selected in the
system settings.
Set Longitude — Enter the system’s longitude using the format you selected in
the system settings.
Set Range — Set the system’s range using the units you selected in the system
settings.
Set GPS Enable — Depending on the data received from the GPS, the L/O
status of the site is automatically controlled
.
Assigning a Trunked System to A State
In addition to the BearTracker System Preprogrammed State information, you may
want to program another system in that same state. Then, when you turn on that
state using the [STATE] control and the Scroll Control, the system you program
will also be unlocked and scanned.
want to program another system in that same state. Then, when you turn on that
state using the [STATE] control and the Scroll Control, the system you program
will also be unlocked and scanned.
Setting Control-Channel Only Mode
M
Setting Site Location Information
MESL