Uniden bc72xlt 사용자 설명서

46

To skip a frequency, press Func and L/O when the 
scanner stops on the frequency during a search or a 
search hold. The scanner stores the frequency in 
memory and automatically resumes the search if it is 
not in hold.

Follow these steps to clear a single frequency from 
skip memory so the scanner stops on it during a 
search.

1. Press Hold to stop the search.
2. Press Func +   or Func +   to select the 

frequency. L/O appears.

3. Press Func + L/O. L/O disappears.

To clear all the skip frequencies at once while 
searching or search hold, press Func then press 
and hold L/O until the scanner beeps.

Notes:
•

If you selected all frequencies to be skipped 
within the search range, the scanner beeps 3 
times and does not search.

•

If you select more than 50 frequencies to skip, 
each new frequency replaces a frequency 
previously stored, beginning with the first stored 
frequency.

•

Press Func +   or Func +   to select a 
skipped frequency while Hold appears. L/O 

appears when you select a skipped frequency.

Sometimes a user might pause before replying to a 
transmission. To avoid missing a reply on a specific 
channel, you can program a 2-second delay into any 
channel or frequency. The scanner continues to 
monitor the channel frequency for an additional 

BC72 Paper OM.fm  Page 46  Monday, October 25, 2004  3:11 PM