blue-seal g1100 사용자 설명서
-25-
Revision 4/F3576
© Moffat Ltd, December 2004
Bottom screws (x4)
Two clamp
plates
6.2.5 BOTTOM LINTEL
1) Open the oven doors.
2) Remove the screws from the ends of the
2) Remove the screws from the ends of the
bottom lintel (one each end).
3) Remove the two screws from the top of
the lintel, and remove the bottom door
catch (2 screws).
catch (2 screws).
6.2.4 RIGHT HAND SIDE PANEL
1) Remove the four screws along the top,
four screws along the bottom, and the four
screws from the rear of the right hand side
panel.
screws from the rear of the right hand side
panel.
Figure 6.2.4
Top screws (x4)
Rear screws
(x4)
(x4)
2) Remove the panel.
4) Remove the bottom lintel from the oven.
Figure 6.2.5
Door catch
Screws
6.2.6 ACCESS TO BURNERS
1) Remove all trays and racks from the oven,
2) Remove the fan baffle (refer 6.2.2).
3) Undo the four screws at the bottom rear of
2) Remove the fan baffle (refer 6.2.2).
3) Undo the four screws at the bottom rear of
the oven securing the oven base.
4) Slide the oven base out of the oven.
5) Loosen the screw securing each of the
5) Loosen the screw securing each of the
clamp plates to the oven tiles.
Figure 6.2.6
6) Rotate the clamp plates and remove the
two tiles from the oven.
Figure 6.2.7
Figure 6.2.8