blue-seal g1100 사용자 설명서

-33-

Revision 4/F3576

6.3.24 DOOR BALL CATCH

1) Remove the bottom lintel from the oven

(refer 6.2.5).

2) Undo both turnbuckles from the door chain

assembly.

6.3.25 DOOR LINKAGE CHAIN ASSEMBLY

3) Remove the door chain assembly and

replace the broken component.

4) Reassemble in reverse order.
5) Adjust chain such that the oven doors

close correctly (refer 6.4.1)

Figure 6.3.37

Turnbuckle

1) Open oven door.
2) Loosen the locknut securing the ball

catch, and unscrew the ball catch.

Figure 6.3.34

4) Replace and reassemble in reverse order.
NOTE: The door striker plates should also

be checked for wear and replaced if
necessary.

Figure 6.3.35

Locknut

Ball

catch

Figure 6.3.36

Striker
Plate

1) Remove the bottom lintel (refer section

6.2.5).

2) Right hand door removal only:

Remove the top lid.

Remove the microswitch actuator pin from
the door pin.

6.3.26 DOOR ASSEMBLY

Microswitch
actuator pin

Figure 6.3.38

3) Undo both turnbuckles from the door chain

assembly.

Figure 6.3.39

Turnbuckle

NOTE: The seals on the door inner and outer

must be replaced with new ones if
damaged.

6) Replace the broken pane and refit both

clean panes either side of the spacer.

7) Reassemble in reverse order.