Konica Minolta psl su-1 사용자 설명서
5 Specifying Fax Settings
23
Destination Number
Enter the fax number to be programmed. (maximum 30
characters)
This must be entered.
characters)
This must be entered.
F Code
Enter the F code sub-address (SUB) if it is required.
(maximum 20 characters)
(maximum 20 characters)
F Code Password
Enter the F code password (SID) if it is required.
(maximum 20 characters)
(maximum 20 characters)
Speed
Select the modem transmission speed.
Programming e-mail addresses
If
E-mail
was chosen in the Speed Dial Registration screen, the E-
mail Destination screen shown below appears.
Destination Name
Enter the name of the recipient to be programmed for
the one-touch dial number. (maximum 20 characters)
the one-touch dial number. (maximum 20 characters)
Destination Address
Enter the mail address to be programmed. (maximum
64 characters)
This must be entered.
64 characters)
This must be entered.
5.2.2 To change the speed dial setting
The settings for a speed dial number already programmed with a
recipient can be changed.
recipient can be changed.
1.
Click the
Speed Dial Setting
menu on the
Fax
tab.
The Speed Dial List screen appears.
2.
Click the speed dial number (
No.
) whose settings you wish to
change.