Konica Minolta 7013 psc 사용자 설명서

 

Hardware Installation-5

 

1. Plug in the power cord.
2. Turn on the power and wait for the printer to warm up. The printer may print out a 

status or start-up page (if this option is not disabled). The Print Server Card then 

provides a print job to the printer which contains the Print Server Card status 

information. Refer to 

 

 for more information.

3. Check the Print Server Card status report. Record the serial number and the Net-

work address or save the status report. You need this information when you con-

figure the printer for your network.

Refer to the appropriate chapters for instructions on configuring the network for the 
Print Server Card.