Konica Minolta di1610 twain um 1.1.0 사용자 설명서
2
Connecting to a Computer
2-2
Di1610 - Twain Driver
2.2
Parallel Port Connection
Use the parallel cable to connect the parallel port of the copier to the
parallel port of the computer.
parallel port of the computer.
Important!
Be sure to use a shielded parallel cable. Use of an unshielded cable
may result in radio frequency interference.
Be sure to use a shielded parallel cable. Use of an unshielded cable
may result in radio frequency interference.
The parallel port is compatible with IEEE1284 Type B standards.
1
Turn off both the copier and your computer.
2
Connect one end of the parallel cable to the parallel port (printer port)
of the computer.
of the computer.
3
Connect the other end of the cable to the parallel port on the back of
the copier. Secure the interface cable connectors using the two clips.
the copier. Secure the interface cable connectors using the two clips.
This completes connection of the copier to the computer.