Konica Minolta kn303ev2 사용자 설명서

Konica Network Interface Card INSTRUCTION MANUAL  2-11

When this box is checked, Novell NetWare (IPX/SPX) is enabled as a protocol for print servers. For

print servers on which NetWare is not a primary protocol, be sure to uncheck this box to disable

NetWare. This box is unchecked in the default setting.

Each Novell print server has its own name, as assigned. For the print server (network interface card),

a default name, KON_(serial number), is used. The serial number is shown in the Status Page as well

as on the label affixed to the back of the network interface card.

If you want to use a name other than the default name or if you want to change the currently assigned

name, you can type a new print server name into this field. 63 characters can be typed in half size. It is

imperative that the name be identically changed on PCONSOLE as well. Otherwise, your newly en-

tered name will be ineffective.

The network administrator assigns passwords to Novell print servers. When passwords are assigned

with PCONSOLE or NWADMIN, those passwords should be set up on the print servers. In Bindery

mode, only upper case passwords can be used.

When typing a password into this field, it must be identical to the password assigned through

PCONSOLE or NWADMIN. The typed password is stored in print server setup memory. For assigning

passwords using PCONSOLE, refer to the Novell manual.

When setting up a print server password, type a password into the [Print Server Password] field, and

then again type the same password into the [Password Retype] field for confirmation. This password is

common to all file servers assigned to the print server.

Clicking the [Accept Settings] button will have no effect unless you type one and the same password

both in the [Print Server Password] and [Password Retype] fields.

Type a password here, for confirmation.

Type a primary file server name in this field to designate a particular file server for your print server to

access. This feature allows you to access a desired file server and avoid accessing an undesired file

server as when the system is set to search for a file server.

If you are using Novell NetWare 4.x Directory Services, type a preferred NDS context here. The pre-

ferred NDS context needs to be a complete context name. Do not type a period (“.”) in the front of the

context pass. You do not need to type a container name (print server name) since it is in the name field

above. Here are examples of contexts with type:

Complete Context

o=standard.ou=organization_1