National Instruments SCXI -1125 사용자 설명서
Chapter
1 About
the
SCXI-1125
1-2
ni.com
Note
For maximum allowable voltage for a particular terminal block refer to Table A-2,
–
SCXI or PXI/SCXI combination chassis
–
One of the following:
•
E/M Series DAQ device
•
SCXI-1600 module
–
A computer if using an SCXI chassis
–
Cabling, cable adapter, and sensors as required for your
application
application
❑
Software
–
NI-DAQ 7.0 or later
–
One of the following software packages:
•
LabVIEW
•
LabWindows
™
/CVI
™
•
Measurement Studio
❑
Documentation
–
Read Me First: Safety and Radio-Frequency
Interference
–
DAQ Getting Started Guide
–
SCXI Quick Start Guide
–
SCXI-1125 User Manual
–
Documentation for your hardware
–
Documentation for your software
National Instruments Documentation
The SCXI-1125 User Manual is one piece of the documentation set for data
acquisition (DAQ) systems. You could have any of several types of
manuals depending on the hardware and software in the system. Use the
manuals you have as follows:
acquisition (DAQ) systems. You could have any of several types of
manuals depending on the hardware and software in the system. Use the
manuals you have as follows:
•
SCXI or PXI chassis manual—Read this manual for maintenance
information on the chassis and for installation instructions.
information on the chassis and for installation instructions.
•
The DAQ Getting Started Guide—This document has information on
installing NI-DAQ and the E/M Series DAQ device. Install these
before you install the SCXI module.
installing NI-DAQ and the E/M Series DAQ device. Install these
before you install the SCXI module.