Netgear PTV1000 사용자 설명서

Installation Guide

tag

Power cord

Push 2 TV

HDMI cable

Power

On/Off HDMI

Composite

Reset

LED

To install and set up the Push 2 TV adapter:

1.  Connect the Push 2 TV adapter to your TV and plug in the power cord.

The Push 2 TV adapter LED is red when it powers up. Then the LED turns yellow 
to indicate it is ready, but is not yet connected to your computer.

2.  Turn on your TV and select the correct TV input source for your TV. 

•

If you are not sure which input source should be used, check the 
documentation that came with your TV set.

•

The Ready for Connection screen displays on your TV within 30 seconds.

If you do not see this screen, make sure the TV input is set to the port where the 
Push 2 TV adapter is connected and all cable connections are firmly secured.

3.  On your laptop, launch the Intel Wireless Display software. There are two ways 

to do this:

•

If your laptop has a 

 button or key, press it.

•

From Windows select Start. Type Intel Wireless Display in the search 
field. Select and run the Intel Wireless Display software.

4.  Use the Intel Wireless Display software to scan and find the Push 2 TV adapter.

The screen on the right shows that the Intel 
Wireless Display software has found the 
wireless adapter.

5.  Double-click the Push 2 TV adapter to connect 

to it. The LED on the Push 2 TV adapter starts 
flashing green. 

6.  If you are connecting the laptop to the Push 2 

TV adapter for the first time, the Push 2 TV 
adapter displays a 4-digit security code on the 
TV. Enter this 4-digit security code into the Intel 
Wireless Display software.

7.  Within a few seconds the TV screen will display your laptop screen. The LED on 

the Push 2 TV adapter turns solid green. 

You are now ready to use Push 2 TV/Intel Wireless Display.