Konica Minolta ip421ev211 사용자 설명서

Print Controller INSTRUCTION MANUAL  3-15

Select the Duplex setting from the list shown by clicking the [

▼] button.

Default is [None].

The settings you can select is as follows:

[None], [Flip on long edge], [Flip on short edge]

[Flip on long edge]

Prints paper so that heads of

both sides become upward

[Flip on short edge]

Prints paper so that the head

of the front becomes the foot

of the back.

Select an output tray from the list shown by clicking the [

▼] button. When the Finisher or Inner

Tray option is not selected in [Setup] tab, or when the Finisher or Inner Tray is not installed, any

setting other than [Default] and Tray 1 is ineffective.

[ON] offsets each copied set upon exit.

How to offset papers differs depending on wether the Finisher is installed or not.

Three sets

Three sets

Three sets

Two sets

Two sets

Two sets

One set

One set

One set

Without FS-107

None

Example)

With FS-107

• When the FS-107 is not installed, every set of copies is output in a direction at right angles

to the previous set of copies.

• When the FS-107 is installed, every set of copies is offset upon exit.

When the FS-107 is not installed, make sure to set the papers same as printing paper

size to both portrait tray and landscape tray.

(Example: A4- and A4R-size papers or B5- and B5R-size papers)