Crestron iw tps-4500 5000 6000 사용자 설명서
2) CONNECTING THE AUDIO TO THE TPS-IMC
Audio is available for the TPS-6000 and 5000.
- TPS-IMC supports balanced and unbalanced signals.
- TPS-IMC supports balanced and unbalanced signals.
3) CONNECTING THE VIDEO TO THE TPS-IMC
Video is available for the TPS-6000, 5000 and 4500.
- TPS-IMC supports balanced and unbalanced video.
- TPS-IMC supports balanced and unbalanced video.
Before video can be enabled the TPS-VID card must be installed.
(For further information on installation please reference the TPS-VID manual)
Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. The BNC connector and screw
terminal mini Phoenix connector is connected in parallel. Possible options are no connection, balance video using twisted pair
cable, unbalance video using twisted pair cable, or unbalanced video using coax cable. Depending on the option, the two jumpers
on the NTSC/PAL VIDEO six-pin connector remain attached or are removed.
terminal mini Phoenix connector is connected in parallel. Possible options are no connection, balance video using twisted pair
cable, unbalance video using twisted pair cable, or unbalanced video using coax cable. Depending on the option, the two jumpers
on the NTSC/PAL VIDEO six-pin connector remain attached or are removed.