Furuno gp37 사용자 설명서

4. ROUTES 

1.  Press the [MENU] key once or twice to 

display the menu. 

2.  Choose ROUTES and then press the 

[ENT] key. 

3.  Choose the route desired. 
4.  Press the [ENT] key. 
5.  Choose the waypoint you want to delete. 
6.  Press the [ENT] key. 
7. Choose “REMOVE?.” 
8.  Press the [ENT] key. 
9.  Press the [MENU] key twice to finish. 
 

To insert a waypoint in a route, do the 
following:  
 
1.  Press the [MENU] key once or twice to 

display the menu. 

2.  Choose ROUTES and then press the 

[ENT] key. 

3.  Choose the route desired. 
4.  Press the [ENT] key. 
5.  Choose the waypoint which will come 

after the waypoint to be inserted. In the 
illustration below, for example, if you want 
to insert the waypoint between KOBE and 
001, choose 001. 

→

°

  9.8 nm    90

°

 

6.  Press the [ENT] key. 
7. Choose “INSERT?.” 
8.  Press the [ENT] key. 
9.  Use the cursor pad to enter waypoint. 
10. Press the [ENT] key. 
11. Press the [MENU] key twice to finish. 
 

You can temporarily deselect an unnecessary 
waypoint from a route. Using the route 
created in the illustration at the top of the next 
column as an example, deselect the 2nd 
intermediate waypoint. 

Intermediate Point 2
(WPT 002)

KOBE
(Starting point)

Intermediate Point 1
(WPT 001)

Intermediate Point 1
(WPT 003)

OSAKA
(Arrival point)

 

If you reconstruct the route without the 2nd 
intermediate point it would look like the 
illustration below. 

WPT 002
SKIP "002"

WPT 001

KOBE

WPT 003

OSAKA

 

1.  Press the [MENU] key once or twice to 

display the menu. 

2.  Choose ROUTES and then press the 

[ENT] key. 

3.  Choose route desired and then press the 

[ENT] key. 

4.  Place the cursor on the waypoint to skip. 
5.  Press the [ENT] key. 
6.  Choose “SKIP?” and then press the [ENT] 

key. “X” appears to the left of the waypoint 
skipped as shown in the illustration below. 

→

°

  9.8 nm    90

°

Skipped

waypoint