DMP Electronics XR500 사용자 설명서

5

For many programming and user options, such as 

Area selections, Menu Displays, and Status Lists, there 

are several displays containing programming.  For example, when programming 

Menu Displays, keypads 1 

through 16 display on two separate displays. First, keypads 1 through 8 display. Press the COMMAND key

to display keypads 9 through 16. This same scheme is used for areas 1 through 32.
Note: Areas not pre-programmed at installation to display at this keypad cannot be viewed.

Asterisks display next to a programming option that is already selected.  As shown in the example, options 

that are selected to display the current programming selection have an asterisk next to the number.  Those 

that are not selected simply display the number. In the Devices example, keypads 3, 8, 9, and 15 are not

selected. In the Areas example, areas 3, 8, 9, 15, 19, 23, 25, and 31 are not selected. In both examples

the numbers with asterisks are selected.  

 *1  *2 

  3 

*4

 *5  *6 

 *7 

8 *13  *14  15  *16

   9  *10  *11  *12

*29  *30  31  *32

*13  *14    15  *16

    9   *10    *11   *12   25  *26  *27  *28

  *1    *2     3  *4
  *5    *6    *7 

8 *21  *22  23  *24

*17  *18  19  *20

To select or deselect a number, simply enter the number using the digit keys on the keypad.  This same 

scheme is used when viewing the panel armed status and other programming and operational functions.  

Remember to press the COMMAND key to display the rest of the device or area numbers.