DMP Electronics XR500 사용자 설명서

31

 

WLS   AUDIBLE: DAY

 

WIRELESS  AUDIBLE

ANY DAY MIN 

This option displays when the House Code entered is for a DMP 1100 Series Wireless

system (1-50). Press any top row key to select the keypad buzzer annunciation

method for wireless low battery and missing messages.  Select ANY to enable 

annunciation anytime.  Select DAY to enable annunciation except during sleeping 

hours (9 PM to 9 AM). Select MIN (minimum) to annunciate only Fire and Fire Verify

zones during daytime hours (9 AM to 9 PM). Default is DAY.

 

KEYPAD PANIC KEYS 

ENABLED:   NO YES

This option allows the two-button panic key operation selected at the keypad to

send the Panic, Emergency, or Fire message to the central station receiver.  Select 

YES to enable the two-button panic operation to operate. To disable the two-button

panic operation, select NO. Default is YES.

 

OCCUPIED

PREMISES:  NO YES

For All/Perimeter or Home/Sleep/Away systems, select YES to allow the panel to

automatically disarm the interior area(s) when arming all areas and a perimeter

zone is not tripped during the exit delay. Select NO to disable this feature. Default

is YES.   
Note: With a Home/Sleep/Away with Guest arming system, this feature only applies

to the main system.   

 

ENHANCED ZONE 

TEST:        NO  YES

Select YES to allow enhanced zone test operation. The default is NO.
Enhanced operation allows:

•  Panic Test and Walk Test functions can be restricted to operate only during an

Area 32, Shift 4 schedule if programmed.  If no schedule is entered, the walk 

test always operates.

•  A Verify message is sent each time a zone is tested. If a zone is tripped

multiple times, a Verify message is sent for each trip.  This allows the Central 

Station to record the number of devices per zone. 

•  The Verify message for each zone test is sent at the time the trip occurs

instead of at the end of Walk Test.

•  The System Test Begin and System Test End Central Station messages indicate

the type of zone being tested.  The System Test Begin message also includes 

the user name and number.

Select YES to enable the use of dual 1K EOL resistors on panel zones one to eight.

This zone operation is used for medium or high risk ULC Listed applications. Please

see Dual EOL section in the XR500 Series Canadian Installation Guide for complete

details. Select NO to disable this feature. Default is YES.

 

SEND  16  CHAR 

NAMES:       NO   YES

This option allows central stations to select being sent either the first 16 characters

of the name field or the entire programmed name, up to 32 characters, for user

name, user profile, zone name, area name, output name, and group name.
Select YES to have the first 16 characters of the name field sent to the central

station. Select NO to send the exact number of characters entered in the name field

from 1 up to the maximum of 32 characters.  Default is YES.   
Note:  Using 32 character names increases the length of the DMP Serial 3 message 

from the panel to the receiver. The SCS-1R receiver does not require an update to

pass these messages to the Host Automation System of the Central Station.  Before 

using names longer than 16 characters, determine whether the Host Automation

System of your Central Station can accept 17 to 32 character names. If not, only use

16 character names.

DUAL  EOL   NO   YES