DMP Electronics XR500 사용자 설명서

35

11.15   

CLS WAIT OUT:      0

 

Enter the output number to turn on for approximately four (4) seconds when Closing

Wait is programmed as YES and the panel successfully communicates the closing

message at arming.  If the closing message does not communicate successfully, this 

output does not turn on.  

11.16   

ARM-ALARM OUT:   0

 

Enter the output number to turn on steady when any area of the system is armed. If 

an alarm occurs causing the keypads to turn Red, this output pulses and continues to 

pulse for approximately five (5) minutes after the panel is disarmed. Enter 0 (zero)

to disable.
Wireless Outputs

•  The Arm-Alarm Output is compatible with the Model 1117 Wireless LED

Annunciator and the Model 1116 Wireless Relay Output connected to a Model

572 Indicator LED.

•  When the Model 1117 is battery operated, the LED is off when the system is

armed to conserve battery life. If an alarm occurs, the output flashes quickly.

•  When using the Model 1116 connected to a Model 572, the LED is on when the

system is armed.  If an alarm occurs, the output pulses.  

•  To operate the Arm-Alarm output within one second, program a fast response

number from 480 to 499. Fast response operation reduces overall wireless

output battery life.

•  To operate the Arm-Alarm output within 15 seconds, program a slow response

number from 450 to 474. Slow response operation increases overall wireless

output battery life.