Velleman DVM171THD 전단
Installation steps to use the DVM171THD on Windows 7.
1) Insert the included CD-ROM into the DVD or CD station. Attention: Do not connect the
DVM171THD to the PC yet.
2) Go to [Computer] ([My Computer] in XP) via menu [Start].
3) Next, right-click on [DVD/CD-RW (ROM)] and select [Explore].
4) Search for [setup.exe].
5) Right-click on [setup.exe] and select [RUN AS ADMINISTRATOR].
6) Follow the instructions onto your screen.
7) After the installation, connect the DVM171THD to a USB port of the PC.
8) Go to [Device Manager] via [Start] => [Control Panel].
9) You should see a yellow question mark and an unknown device in the list.
10) Right-click on the unknown device and select [Properties].
11) Now, open the [Drivers] tab (driver).
12) Click on [Update Driver Software…].
13) Select the 2
3) Next, right-click on [DVD/CD-RW (ROM)] and select [Explore].
4) Search for [setup.exe].
5) Right-click on [setup.exe] and select [RUN AS ADMINISTRATOR].
6) Follow the instructions onto your screen.
7) After the installation, connect the DVM171THD to a USB port of the PC.
8) Go to [Device Manager] via [Start] => [Control Panel].
9) You should see a yellow question mark and an unknown device in the list.
10) Right-click on the unknown device and select [Properties].
11) Now, open the [Drivers] tab (driver).
12) Click on [Update Driver Software…].
13) Select the 2
nd
option [Search for Drivers on my Computer].
14) Browse to the folder [Drivers] on the CD-ROM.
15) Click on [OK].
16) Click on [Allow the installation procedure to start].
17) The drivers are installed and the device is ready to be used.
15) Click on [OK].
16) Click on [Allow the installation procedure to start].
17) The drivers are installed and the device is ready to be used.