Brother HL-5040 사용자 설명서
TCP/IP CONFIGURATION 10 - 6
YL4US_FAX2800MFC4800-FM5.5
Using ARP to Configure the Print
Server IP Address
Server IP Address
If you are unable to use the BRAdmin application or the printer’s
control panel and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on
Windows
control panel and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on
Windows
®
systems that have TCP/IP installed as well as Unix
systems. To use arp enter the following command at the command
prompt:
prompt:
arp -s ipaddress ethernetaddress
Where
ethernetaddress
is the Ethernet address (MAC address)
of the print server and
ipaddress
is the IP address of the print
server. For example:
Windows® Systems
Windows
®
Systems require the colon ":" character between each
digit of the Ethernet address.
arp -s 192.189.207.2 00:80:77:31:01:07