Coleman tyl x2 사용자 설명서

– Insert one pole tip into the grommet on the 

webbing located at the corners of the tent (illus. 4).

– Go to opposite end of the same pole and 

gradually apply pressure to the pole, forming an 

arch, until you are able to insert the pole tip 

into the grommet. 

– Repeat for second pole.

– Layout and position tent with door facing 

desired direction. (illus. 1)

– For best results in windy conditions, position 

door or back of tent into the wind.

– Unzip door.

– Stake down tent corners. Keep the floor 

taut. (illus. 2)

– Assemble Frame Poles by interlocking the 

shock-corded sections. This will make two 

long silver poles. 

– Lay the poles out diagonally, centered on the 

tent.The center of the poles should cross 

forming an “X” in the middle of tent. (illus. 1)

– Fasten toggle & loop on top of tent over both 

poles. (illus. 1), (illus. 3)

Part No. 9830-1131

Part No. 9830-1231

Part No. 9830-1331

Attach center of the tent to the poles

Toggle & Loop 

Tent stake

through Loop

Insert Pole Talon on

stake loop into pole.

illus. 5 Tent frame up

illus. 3 
Toggle & Loop