Crestron hbk-6000 smk-6000 사용자 설명서
Crestron HBK-6000 & SMK-6000
Hatch Back and Swivel Mount Kits
Hatchback and Swivel Mount
Kits: HBK-6000 & SMK-6000
Kits: HBK-6000 & SMK-6000
Description
The Hatchback and Swivel Mount Kits, HBK-6000 and SMK-6000 (each sold
separately), are designed for attachment to the Crestron
separately), are designed for attachment to the Crestron
TPS-6000, TPS-5000, and
TPS-4500 tilt touchpanels.
The HBK-6000 hatchback is a sleekly designed rear-cover option that provides
cable, management, wire strain relief, and prevents unauthorized users from
disconnecting the touchpanel. The wire exit hole at the rear of the HBK-6000 is sized
to accommodate all cables that would typically be connected to the touchpanel.
These include the Crestron-furnished 10-position, Siamese, or Triamese network
cable; an off-the-shelf DB15HD VGA cable, a CAT5 Ethernet cable, and a DC
power cable from an optional PW-2420RU power supply.
cable, management, wire strain relief, and prevents unauthorized users from
disconnecting the touchpanel. The wire exit hole at the rear of the HBK-6000 is sized
to accommodate all cables that would typically be connected to the touchpanel.
These include the Crestron-furnished 10-position, Siamese, or Triamese network
cable; an off-the-shelf DB15HD VGA cable, a CAT5 Ethernet cable, and a DC
power cable from an optional PW-2420RU power supply.
The SMK-6000 swivel mount accessory reduces the chance of theft while improving
viewing convenience. The base rotates 330 degrees, mounts on the desktop, in a
lectern, or on a conference table, and accommodates surface thicknesses from
3/4-inch minimum to 1 3/8-inches maximum, using the hardware provided. The
swivel mount kit includes the same rear cover as the HBK-6000 option, which
covers the cable connections. Routing the cables down through the center of the
swivel assembly keeps the cables completely hidden from the work surface.
viewing convenience. The base rotates 330 degrees, mounts on the desktop, in a
lectern, or on a conference table, and accommodates surface thicknesses from
3/4-inch minimum to 1 3/8-inches maximum, using the hardware provided. The
swivel mount kit includes the same rear cover as the HBK-6000 option, which
covers the cable connections. Routing the cables down through the center of the
swivel assembly keeps the cables completely hidden from the work surface.
The SMK-6000 should not be used in combination with the TPS-XVGA RGB
Graphics Card, as it does not accommodate the size and bend-radius of a typical
off-the-shelf RGBHV cable. Instead, the TPS-XVGA-BV RGB Graphics Card
w/Balanced Video should be used. The TPS-XVGA-BV includes a special Triamese
cable, which is compact and flexible enough to use with the SMK-6000.
Graphics Card, as it does not accommodate the size and bend-radius of a typical
off-the-shelf RGBHV cable. Instead, the TPS-XVGA-BV RGB Graphics Card
w/Balanced Video should be used. The TPS-XVGA-BV includes a special Triamese
cable, which is compact and flexible enough to use with the SMK-6000.
Supplied Hardware
The hardware supplied in the kits is listed in the following table.
Supplied Hardware of the HBK-6000 and SMK-6000 Hatchback and Swivel Mount Kits
HBK-6000 SMK-6000*
One (1) Metal Bracket
One (1) Swivel Mount Assembly
One (1) Plastic Cover
One (1) Metal Bracket
Four (4) Screws 4-40 X 3/16 inch
One (1) Metal Plate
One (1) Plastic Cover
Sixteen
(16)
Screws
(4) 4-40 X 3/16-inch
(4) 6-32 X 1/4-inch
(4) 8-32 X 5/8-inch
(4) 8-32 X 1-inch
(4) 6-32 X 1/4-inch
(4) 8-32 X 5/8-inch
(4) 8-32 X 1-inch
* The SMK-6000 mounting kit includes a template for preparing the mounting surface.
Installation Guide – DOC. 6111
Hatchback and Swivel Mount Kits: HBK-6000 & SMK-6000
• 1