Netgear rangemax wn802t 사용자 설명서

3-4

Wireless Security Settings

–

Data Encryption. The available options depend on the Network Authentication setting 
selected (see 

); otherwise, the default is None. The data encryption settings are 

explained in the following table:

Use of passphrases and keys are explained in the following section:

–

Passphrase. To use the Passphrase to generate the WEP keys, enter a passphrase and 
click Generate Keys. You can also enter the keys directly. These keys must match the 
other wireless stations.

–

Key 1, Key 2, Key 3, Key 4. If using WEP, select the key to be used as the default 
key. Data transmissions are always encrypted using the default key. The other keys 
can only be used to decrypt received data. 

–

Preshared Key Passphrase. If using WPA-PSK, enter the passphrase here. All 
wireless stations must use the same passphrase (network key). The network key must 
be from 8 to 63 characters in length.

None

No encryption is used.

64 bits WEP

Standard WEP encryption, using 40/64 bit encryption.

128 bits WEP

Standard WEP encryption, using 104/128 bit encryption. 

152 bits WEP

Proprietary mode that will only work with other wireless devices that support 
this mode. 

TKIP

This is the standard encryption method used with WPA and WPA2. 

AES

This is the standard encryption method for WPA2.

TKIP + AES

This setting supports both WPA and WPA2. Broadcast packets use TKIP. For 
unicast (point-to-point) transmissions, WPA clients use TKIP, and WPA2 
clients use AES. 

Note:  WEP and TKIP provide only legacy rates of operation. So, AES is the 

recommended solution to use the 802.11n rates and speed.