Chevrolet 2009 colorado 사용자 설명서
9
(Fan Control): Turn the knob clockwise or
counterclockwise to increase or decrease the fan speed.
If the knob is set on “0” (zero), some outside air will
still enter the vehicle and will be directed according to
the position of the mode knob.
still enter the vehicle and will be directed according to
the position of the mode knob.
Air Delivery Mode Control: Turn the knob clockwise
or counterclockwise to change the current airflow mode.
or counterclockwise to change the current airflow mode.
Select from the following modes:
H
(Vent): Air is directed to the instrument panel
outlets.
\
(Bi-Level): Air is divided between the instrument
panel outlets and floor and side window outlets. Cooler
air is directed to the upper outlets and warmer air to
the floor outlets.
air is directed to the upper outlets and warmer air to
the floor outlets.
[
(Floor): Air is directed to the floor outlets.
Recirculation cannot be selected while in floor mode
because this could cause the interior window to fog.
because this could cause the interior window to fog.
/
(Floor/Defog): This mode clears the windows of fog
or moisture. Air is directed to the floor, windshield,
and side window outlets. When this mode is selected,
the system runs the air conditioning compressor
unless the outside temperature is near freezing or
below. Recirculation is not available in this mode.
and side window outlets. When this mode is selected,
the system runs the air conditioning compressor
unless the outside temperature is near freezing or
below. Recirculation is not available in this mode.
0
(Defrost): This mode clears the windshield of fog
or frost more quickly. Air is directed to the windshield
and side window outlets. When this mode is selected,
the system runs the air conditioning compressor
unless the outside temperature is near, or below
freezing. Recirculation is not available in this mode.
and side window outlets. When this mode is selected,
the system runs the air conditioning compressor
unless the outside temperature is near, or below
freezing. Recirculation is not available in this mode.
Do not drive the vehicle until all the windows are clear.
#
(Air Conditioning): Press to turn the air conditioning
system on or off. An indicator light on the button comes
on to show that the air conditioning is on.
on to show that the air conditioning is on.
The fan control must be on to use the air conditioning.
There might be a slight change in engine performance
when the air conditioning compressor shuts off and turns
on again. This is normal. The system is designed to
make adjustments to help with fuel economy while still
maintaining the selected temperature.
when the air conditioning compressor shuts off and turns
on again. This is normal. The system is designed to
make adjustments to help with fuel economy while still
maintaining the selected temperature.
The air conditioning system removes moisture from the
air, so a small amount of water might drip under the
vehicle while idling or after turning off the engine.
This is normal.
air, so a small amount of water might drip under the
vehicle while idling or after turning off the engine.
This is normal.
@
(Recirculation): Press to turn the recirculation
mode on or off. An indicator light on the button comes on
to show that the recirculation mode is on. This mode
recirculates and helps to quickly cool the air inside the
vehicle. It can be used to prevent outside air and odors
from entering the vehicle.
to show that the recirculation mode is on. This mode
recirculates and helps to quickly cool the air inside the
vehicle. It can be used to prevent outside air and odors
from entering the vehicle.
3-20