briggs--stratton 5900861 사용자 설명서

www.SnapperPro.com

Operation

Executing an End-Of-Row Zero Turn

Your Zero Turn Rider’s unique ability to turn in
place allows you to turn around at the end of a
cutting row rather than having to stop and Y-turn
before starting a new row.

For example, to execute a left end-of row zero turn:

1. Slow down at the end of the row.

2. Move the RIGHT ground speed control lever

forward slightly while moving the LEFT ground
speed control lever back to center and then
slightly back from center.

3. Begin mowing forward again.

This technique turns the rider LEFT and slightly
overlaps the row just cut —eliminating the need
to back up and re-cut missed grass.

As you become more familiar and experienced
with operating the Zero Turn rider, you will
learn more maneuvers that will make your
mowing time easier and more enjoyable.

Remember, the more you practice, the
better your control of the Zero Turn will be!

Practice Turning Around a Corner

While traveling forward allow one handle to gradually return
back toward neutral. Repeat several times.

NOTE: To prevent pivoting directly on the tire tread,
it is best to keep both wheels going at least slightly
forward.

Figure 13. Turning Around a Corner

Figure 14. Turning in Place

Figure 15. Executing an End-Of-Row Turn

Practice Turning In Place

To turn in place, “Zero Turn,” gradually move one ground
speed control lever forward from neutral and one lever back
from neutral simultaneously. Repeat several times.

NOTE: Changing the amount each lever is pulled—
forward or back, changes the “pivot point” you turn
on.

Executing
Turns

Turning
In-Place

Not

for

Reproduction