Zebra 49834 사용자 설명서
Preventive and Corrective Maintenance
Preventive Maintenance—Cleaning the Printhead and Rollers
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
135
Cleaning the Rollers
To clean the rollers, complete these steps:
1.
Check the platen roller for stuck labels and adhesive residue.
2.
Check the peel roller assembly for stuck labels and adhesive residue.
3.
To clean the platen roller, peel roller, or pinch roller, wet a clean lint-free cloth with
isopropyl alcohol and, using your fingers, rotate the roller while repeatedly wiping the full
length of the roller.
isopropyl alcohol and, using your fingers, rotate the roller while repeatedly wiping the full
length of the roller.
4.
Using a lint-free cloth dampened with isopropyl alcohol, wipe away dust and lint that may
have accumulated on the media and ribbon paths.
have accumulated on the media and ribbon paths.
5.
Reload ribbon and media and close and latch the toggle locking lever.
6.
Close the front cover and restore power.
7.
If necessary, run the PAUSE Key Self Test to check print quality.