Zebra 49834 사용자 설명서
224
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
Preventive and Corrective Maintenance
Roller System—Peel Roller
Peel Roller
These instructions are for installing the peel roller. Read these instructions thoroughly before
starting the installation.
starting the installation.
Tools Required
Installation Instructions
1.
Refer to
and remove the print engine from the applicator.
Remove the Peel Roller
1.
. Rotate the latch lever clockwise for a right-hand unit, counterclockwise
for a left-hand unit, to release the peel roller.
2.
Loosen and remove the peel roller mounting screw.
3.
Pull the peel roller out of the printer.
Phillips Screwdriver Set
Caution • Observe proper electrostatic safety precautions when handling any
static-sensitive components such as circuit boards and printheads.
static-sensitive components such as circuit boards and printheads.