Zebra 49834 사용자 설명서
26
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
System Description
Main Print Engine Assembly Locations
Drive System
. The 170PAX4 drive system uses a series of pitch timing belts and pulleys. The
staged belt drive systems consist of one stage from stepper motor to a compound pulley and
another serpentine stage from the compound pulley to the pinch and peel rollers. The final
stage is from the compound pulley to the platen shaft.
another serpentine stage from the compound pulley to the pinch and peel rollers. The final
stage is from the compound pulley to the platen shaft.
The serpentine belt uses a stationary backside idler pulley to maximize timing belt wrap angle
around the pinch and peel roller pulleys. The serpentine belt also uses a spring-loaded
backside idler pulley to maintain belt tension during backfeed. Both serpentine and platen
shaft belts are constantly pretensioned by means of an extension spring.
around the pinch and peel roller pulleys. The serpentine belt also uses a spring-loaded
backside idler pulley to maintain belt tension during backfeed. Both serpentine and platen
shaft belts are constantly pretensioned by means of an extension spring.
Figure 9 • Drive System
Stepper Motor Belt
Stepper Motor Pulle
Long
(Serpentine)
Belt
Pinch Roller Pulleys
Platen Pulley
Short Belt
Intermediate
Pulley