Zebra 49834 사용자 설명서
Operations
Select a Communication Interface
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
43
Select a Communication Interface
. The way that you connect your print engine to a data source depends on the
communication options installed in the print engine. You may any available connection to send
commands and label formats from a host computer to the print engine.
commands and label formats from a host computer to the print engine.
Figure 20 • Cable Connections
Standard Connections
The method of interfacing the print engine to a data source depends on the communication
options installed in the print engine and the host. The standard interfaces are an RS-232 serial
data port, an IEEE 1284 bidirectional parallel port, and a DB-15 applicator interface port.
options installed in the print engine and the host. The standard interfaces are an RS-232 serial
data port, an IEEE 1284 bidirectional parallel port, and a DB-15 applicator interface port.
RS-232 Serial A serial communication method consisting of data and control signals;
available as a standard feature on most PCs and other hosts. See
available as a standard feature on most PCs and other hosts. See
Caution • Connecting a data communications cable while the power is ON may damage
the print engine.
the print engine.
Note •
You must supply all interface cables for your application. Refer to
for specific cable requirements.
Left-Hand
Right-Hand
1
3
2
2
3
1
1
DB-15 applicator interface port
2
Parallel interface connector
3
DB-9 serial interface connector