Dual XD6320 사용자 설명서
Problem
Cause
Action
Unit will not turn on
(no power)
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Check connections for proper voltage
(11~16VDC)
(11~16VDC)
Black wire not connected
Check connection to ground
Fuse blown
Replace fuse
Unit has power
(but no sound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
other or touching chassis ground
Insulate all bare speaker wires from
each other and chassis ground
each other and chassis ground
Unit blows fuses
Yellow or red wire touching chassis ground
Check for pinched wire
Speaker wires touching chassis ground
Check for pinched wire
Incorrect fuse rating
Use fuse with correct rating
Excessive skipping
Unit is not mounted correctly or backstrap is
not secure
not secure
Check mounting sleeve and backstrap
support
support
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches
ERROR-01 appears
on display
Disc read error
Press eject or RESET
ERROR-02 appears
on display
Focus error or disc is in upside down
Press eject or RESET
Unit will not accept
a disc
CD mechanism position out of alignment
Press EJECT for 3 seconds to reset
CD mechanism position
CD mechanism position
CD transit screws still in place
Remove 2 transit screws located on top
of the unit
of the unit
Troubleshooting
XD6320
WARRANTY
Dual Electronics Corp.
21318 64th Ave. South
Kent, WA 98032
Toll Free: 1-866-626-7863
www.dualav.com
©2005 Dual Electronics Corp. All rights reserved.
NSA0205-V01