Crestron simpl plus language ref 사용자 설명서

Software Crestron 

®

z SIMPL+

SLOT_NUMBER is an INTEGER containing the slot number of the card to query.

JOIN_NUMBER is an INTEGER containing the Join number to get the status. 

TYPE is one of several predefined constants:

din:        Digital inputs from device (symbol output list)

ain:        Analog inputs from device (symbol output list)

dout:      Digital outputs to device (symbol input list)

aout:      Analog outputs to device (symbol input list)

An Integer. For Digital values, a non-zero value indicates a logic high and a 0 value 
indicates a logic low. For analog values, a 16-bit number is returned corresponding 
to the state of the analog join.

Assuming a relay card has been defined in Slot 1 and Relay A2 has a signal name tied 
to it, and a CNXIO-16 has been defined in Slot 2 and cue i1 has a signal tied to it, this 
SIMPL+ statement will connect the two:

    SetSlot(1,2,dout) = GetSlot(2,1,din);

SIMPL+ Version 2.00 only. This function is not available in Versions 1.00 or 3.00.

X-Generation only

IsSignalDefined

INTEGER IsSignalDefined <input/output signal>;

NOTE: Access to serial signals is not supported.

NOTE: This is not a permanent connection; it will only set the state when this 
statement is executed.