Iomega 333401 사용자 설명서
36
If the drive is found, run a test backup. *
If the drive is still not found, call Iomega’s technical support at 1-888-4-IOMEGA
and select the phone options that lead you to speak to a Ditto product technician.
Immediately advise the technician that you are calling to resolve the NT Tools
Ditto Dash DX conflict. There will be no technical support charges incurred to
address this specific issue.
and select the phone options that lead you to speak to a Ditto product technician.
Immediately advise the technician that you are calling to resolve the NT Tools
Ditto Dash DX conflict. There will be no technical support charges incurred to
address this specific issue.
*
If a read/write error (error 5151) occurs while running a backup in NT 4.0, download
and run the software update “NTpnpFIX.exe” from Iomega’s web site:
www.iomega.com.
www.iomega.com.
If other hardware on your system fails to work after you have installed and configured
your Ditto Max drive, you will need to reinstall the drivers for that hardware.
Software Installation
Close all applications including virus scanners and screen savers. Insert the
Ditto Tools CD-ROM into the CD-ROM drive. The Iomega Backup 97
installer will begin automatically.
Ditto Tools CD-ROM into the CD-ROM drive. The Iomega Backup 97
installer will begin automatically.
If the Iomega Backup 97 installer doesn’t begin automatically, follow the steps below:
1
Choose Run from the Start menu.
2
Type X:\INSTALL (where X is the letter of your CD-ROM drive)
in the Command Line text box.
in the Command Line text box.
3
Click on OK. Iomega Backup 97 will being to install.
4
Follow the on-screen instructions to complete installation.
5
Be sure to register on-line or send in your registration card.
6
Restart Windows NT before running Iomega Backup 97.
1-Step Backup
For your first backup, we recommend using 1-Step Backup. Simply double-
click on the 1-Step Backup icon on your taskbar. (Be sure to close all screen
saver and virus checker programs and insert a tape cartridge.) 1-Step
Backup will make a full backup of your hard drive. This procedure may
take several hours. For more detailed information about 1-Step Backup, see
the on-line help file in Iomega Backup.
click on the 1-Step Backup icon on your taskbar. (Be sure to close all screen
saver and virus checker programs and insert a tape cartridge.) 1-Step
Backup will make a full backup of your hard drive. This procedure may
take several hours. For more detailed information about 1-Step Backup, see
the on-line help file in Iomega Backup.
If you start 1-Step Backup and a message displays stating that the tape drive
cannot be found, verify the hardware connections you made when installing the
tape drive. If you installed a parallel port drive, verify that it is plugged into an
outlet. Restart Windows and try 1-Step Backup again. If the tape drive is still
not detected, refer to the “Hardware and Software Configuration” section
below. Also review “Solving Problems” in Using Your Ditto Tape Drive
section of this guide.
cannot be found, verify the hardware connections you made when installing the
tape drive. If you installed a parallel port drive, verify that it is plugged into an
outlet. Restart Windows and try 1-Step Backup again. If the tape drive is still
not detected, refer to the “Hardware and Software Configuration” section
below. Also review “Solving Problems” in Using Your Ditto Tape Drive
section of this guide.