Iomega 333401 사용자 설명서
51
Your Ditto Easy 800 Tape Drive
Your Ditto Easy 800 Tape Drive
Your Ditto Easy 800 Tape Drive
Your Ditto Easy 800 Tape Drive
Your Ditto Easy 800 Tape Drive
Inserting and Removing Tapes
Grip and insert your tape minicartridge. Push past the spring resistance
of the drive until the minicartridge snaps into place, leaving about 3 cm
(about 1 in) still outside the drive. To remove the tape minicartridge
from the drive, grip as before and pull it straight out of the drive. Do
not remove the minicartridge if the drive activity light is on and
blinking. Remove tapes when not in use.
of the drive until the minicartridge snaps into place, leaving about 3 cm
(about 1 in) still outside the drive. To remove the tape minicartridge
from the drive, grip as before and pull it straight out of the drive. Do
not remove the minicartridge if the drive activity light is on and
blinking. Remove tapes when not in use.
Tape Capacity and Compatibility
When using preformatted tapes with your Ditto Easy 800 drive,
Iomega recommends Travan preformatted tapes. The formatted
capacity of Ditto Easy 800 tapes (Travan TR-3) are about 400 MB.
Compressing your raw data by a 2:1 ratio (compression ratios depend
on data type) allows you to store up to 800 MB of data on the tapes.
Iomega recommends Travan preformatted tapes. The formatted
capacity of Ditto Easy 800 tapes (Travan TR-3) are about 400 MB.
Compressing your raw data by a 2:1 ratio (compression ratios depend
on data type) allows you to store up to 800 MB of data on the tapes.
Ditto Easy 800 drives will read, write, and format as shown in the
following table.
following table.
Tape Format
Tape Type
Read
Write
Format
QIC-80 Travan
TR-1
YES
YES
YES
QIC-80 Wide
5122
YES
YES
YES
QIC-80XL
2120XL
YES
YES
YES
QIC-80
2080 or 2120
YES
YES
YES