Namco Bandai Games 90500146 사용자 설명서
Page 60
6-2Greasing the Pedal Assy Plunger
1.
Remove 4off security screw (M5x12) and remove the switch cover plate.
2.
Remove 2off whizztite nuts (M4) and remove the switch.
3.
Remove 4off whizztite nuts (M4) and remove the plunger assembly.
Note: The plunger is spring loaded. Keep the plunger pressed in when removing
the assy and release the plunger slowly.
4.
Remove any old grease and dirt from the plunger and pedal plate.
5.
Grease both the plate and spherical portion of the plunger.
6.
Reassemble in reverse order.
Microswitch
Holder
Plunger
Plate
Grease Here
Whizz nut (M4)
Whizz nut (M4)
urity screw (M5x12)
Switch plate