Konica Minolta di1610 um 1.0.0 사용자 설명서
When a Message Appears
6
Di1610
6-19
6.8
What Does Each Message Mean?
Message
Cause
Action
*REMOVE PAPER IN
BYPASS TRAY*
BYPASS TRAY*
Paper is loaded in the
Bypass Tray.
Bypass Tray.
Remove the paper from the
Bypass Tray.
Bypass Tray.
FRONT COVER OPEN
CLOSE FRONT COVER
The Front Cover of the main
unit is open or not securely
closed.
unit is open or not securely
closed.
Securely close the Front
Cover.
Cover.
DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER
The Auto Document Feeder
is lifted up.
is lifted up.
Securely close the Auto
Document Feeder.
Document Feeder.
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
The Document Feeder
Cover is open.
Cover is open.
Securely close the
Document Feeder Cover.
Document Feeder Cover.
SET ORIGINAL TO ADF
When beginning copying,
for example, 2in1 copying,
the original was not loaded
into the Auto Document
Feeder. Otherwise, the
Auto Document Feeder is
open.
for example, 2in1 copying,
the original was not loaded
into the Auto Document
Feeder. Otherwise, the
Auto Document Feeder is
open.
Load a document into the
Auto Document Feeder.
Securely close the Auto
Document Feeder.
Auto Document Feeder.
Securely close the Auto
Document Feeder.
MEMORY FULL
PRESS ANY KEY
The size of the data for the
scanned document has
exceeded the capacity of
the memory.
scanned document has
exceeded the capacity of
the memory.
Press the [Panel Reset]
key, or turn the machine off,
then on again. (The
scanned data should be
cleared from the memory.)
key, or turn the machine off,
then on again. (The
scanned data should be
cleared from the memory.)
MACHINE TROUBLE
SERVICE CALL (C####)
Some problem occurred in
the machine.
the machine.
Turn the machine off, then
on again. If the error is still
displayed, contact your
service representative.
on again. If the error is still
displayed, contact your
service representative.
FUSER COVER OPEN
CLOSE FUSER COVER
The Fuser Cover of the
main unit is open or not
securely closed.
main unit is open or not
securely closed.
Close the Fuser Cover,
then open and close the
Front Cover.
then open and close the
Front Cover.
PAPER JAM
OPEN FRONT COVER
A paper misfeed occurred.
The Fuser Cover of the
main unit is open or not
securely closed.
main unit is open or not
securely closed.
Close the Fuser Cover,
then open and close the
Front Cover.
then open and close the
Front Cover.
INCORRECT T/C TYPE
CHANGE T/C
Incorrect type of toner
cartridge is installed.
cartridge is installed.
Install the correct type of
toner cartridge. (p. 6-4)
toner cartridge. (p. 6-4)
Toner cartridge is not
installed.
installed.
Install the toner cartridge.
(page 6-5)
(page 6-5)