Konica Minolta cf2002 cf3102 um 7.1.0 사용자 설명서
![Konica Minolta](https://files.manualsbrain.com/attachments/35219ede2c552e8742b3de2ff2e860862a7599e0/common/fit/150/50/c44fe408e3f52ec6eb70851dc1658706f6e810acc0fd6ff6802de7d0c07a/brand_logo.png)
Replacing Parts and Supplies
7
CF2002/CF3102
7-11
7.3
Empty the Hole Punch Waste Container
If the punch kit is installed in the finisher FN-8, the message “Remove
Punch Scraps” will appear when the hole-punch waste container is full.
Punch Scraps” will appear when the hole-punch waste container is full.
To empty the hole-punch waste container
Empty the hole-punch waste container, and then re-install it according to
the following procedure.
the following procedure.
1
Slide the finisher away from the
copier.
copier.
2
Pull out the hole-punch waste
container.
container.
3
Empty the container.
4
Insert the hole-punch waste
container into its original position.
container into its original position.
5
Slide the finisher back against the
copier.
copier.
CF2002.book Page 11 Friday, June 13, 2003 9:29 AM