Kathrein BZD 30 사용자 설명서
11
Setting up, Connecting and Commissioning
1. Connect the antenna to the receiver
using the coax cable provided (see e.g.
manual UFD 570/S, connection
example). You can set up the antenna
independently of the polarisation of the
radiated signals. The lettering
(horizontal/vertical) on the front of the
antenna is intended for optimising in
critical reception systems (see
Optimising on page 12).
manual UFD 570/S, connection
example). You can set up the antenna
independently of the polarisation of the
radiated signals. The lettering
(horizontal/vertical) on the front of the
antenna is intended for optimising in
critical reception systems (see
Optimising on page 12).
2. Connect the receiver to the TV set (for
more detailed information, refer to the
instructions for your receiver) and
switch on. Switch the TV set to AV
mode, if the TV set does not switch over
automatically.
instructions for your receiver) and
switch on. Switch the TV set to AV
mode, if the TV set does not switch over
automatically.
3. Using the set-up menu of the receiver,
ensure that the power supply to the
antenna via the coax cable is switched
on. When operating with the Kathrein
UFD 570/S, see manual network
configuration.
antenna via the coax cable is switched
on. When operating with the Kathrein
UFD 570/S, see manual network
configuration.