Runco pl-61dhd 사용자 설명서
30
Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
4.2
Selecting the Input
Source
Selecting the Input
Source
By default, the PlasmaWall is configured to display the signal received on its RGBHV
(PC2/COMPONENT2) input. To use the DVI (PC3) input instead:
(PC2/COMPONENT2) input. To use the DVI (PC3) input instead:
1.
Press MENU and enter the Service Menu passcode.
2.
Select Service from the Main Menu.
3.
Select Display Device from the Service Menu, then select Configure.
4.
Input 1 is the RGBHV input. Press
to select display input 2 (DVI).
4.3
Setting the PC Display
Properties
Setting the PC Display
Properties
To maximize image quality when using the PlasmaWall with a personal computer, you
may need to adjust the display properties of your PC video card. To do this:
may need to adjust the display properties of your PC video card. To do this:
1. Choose Settings from the Windows Start
menu and click on “Control Panel.”
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Adjust the resolution to 1024x768 pixels.
You must enter a passcode to access the Service menu.
Note