Nero nerovision express 3 사용자 설명서

 

Capturing is a way of taking the video from your DV camera (or from external video 
sources connected to your video capture card) and bringing it to your computer. 
This chapter will assist you with your first video capture. 
 

 

NOTE: If you simply want to transfer the video from one external source to the PC 
to use it later in a project, select the 'Record video' task on the 'CONTENT' screen. 
If you want to make a DVD-Video, VCD, SVCD or miniDVD and need to capture 
video for that specific project, you should select the respective 'Make DVD (or CD, 
SVCD, miniDVD)' task from the START screen and select 'Capture Video' on the 
CONTENT page. That way you can capture video and work on your project 
simultaneously. 

There are two types of video sources – analog video and digital video (DV) which 
have different hardware requirements. 

Digital Video (DV): a DV source means that the video signal is delivered by the 
device to your computer in a digital format. Such devices would typically be DV 
Camcorders. All you need to transfer video to your PC is a connecting cable and 
respective sockets on your PC. 

Analog Video: video signals from an analog source need to be converted to a 
digital format for your computer to be able to work with them. Examples of analog 
video sources include VHS video recorders, TV, VHS-C, 8mm and Hi-8 
Camcorders. Unlike DV sources where the device itself delivers digital video 
signals to your PC, you need to have a video capture card installed in case of 
analog video signals. The capture card then converts the analog video signals into 
digital signals. 

Step 1: Please make sure that you have followed the manufacturer’s instructions 
on installing your Firewire (IEEE 1394) card or USB card unless it is built-in to your 
computer or laptop. 

•  22