Ideal 61320 사용자 설명서
2. Range Button
• Pressing the range button selects the manual ranging
mode.
• When the range button is pressed
RANGE
will
appear in the upper left of the LCD display.
• WHen in the manual range mode, pressing the range
button changes the measurement range.
• To return to auto ranging, hold the range button for >2
seconds.
3. Hold Button
• The hold button is used to hold the measured value for
all functions.
• The value is displayed alon g with the annunciator.
• This function can be used in the min/max or peak
• This function can be used in the min/max or peak
min/max mode.
Auto Power Off (APO)
If the meter is left idle for more than 10 minutes, the meter
automatically turns the power off. When this happens, the
state (non-logic measurement) of the meter is saved, the meter
can be turned back on by pushing any button or changing the
rotary switch. The meter will give an alarm 15 seconds before
the meter automatically turns the power off. To disable the
auto power off function, power up the meter wile pressing
either the range or min/max button. To enable the auto power
off, switch the meter off and then on again without depressing
any buttons.
If the meter is left idle for more than 10 minutes, the meter
automatically turns the power off. When this happens, the
state (non-logic measurement) of the meter is saved, the meter
can be turned back on by pushing any button or changing the
rotary switch. The meter will give an alarm 15 seconds before
the meter automatically turns the power off. To disable the
auto power off function, power up the meter wile pressing
either the range or min/max button. To enable the auto power
off, switch the meter off and then on again without depressing
any buttons.
4
H