Lowrance lmf-400 사용자 설명서

49 

To unconfigure a Suzuki Engine Interface: 
The unconfigure command (Unset Engine) allows you to set a Suzuki 

Engine Interface back to its original unconfigured status. 

Unconfiguring an interface also will allow you to change the engine 

model selected during configuration. 

  

1. Press 

, use the 

 and 

  keys  to  select 

 and 

press 

.  

2. Highlight 

 and press 

 to open the Bus Devices list.  

3. Select the desired engine interface and press 

. The Engine 

Interface menu will appear. Select 

 and press 

. The 

following message will appear: Press Enter to UnConfig Device Name.

4.

Press 

 and you will be directed back to the Bus Devices list., 

where the engine interface you unconfigured will be shown as UnCfg 

Intrfc. 
NOTE: 

If, after configuring, unconfiguring or reconfiguring an engine 

interface, it is not shown on the Bus Devices list, you will have to 

refresh the list. Press 

, select

 and press 

. 

Highlight 

 and press 

. The Fuel Flow will be listed 

with its new configuration setting.  

To reconfigure Suzuki Engine Interface (multiple engines 
only): 
The Change Engine command is used to switch the current 

configuration of a Suzuki Engine Interface with the configuration from 

a different engine. Change Engine, however, will only appear on your 

LMF-400 menu if you are using an engine-tank configuration that 

includes multiple engines. If all engine interfaces on your vessel are 

configured, you will have to unconfigure an interface to free up its 

configuration name (Port, Center, Starboard).   
If all three engine interfaces are configured, leaving no name 
configuration available, follow the first set of instructions below. If the 
desired configuration name is available, follow the second set of 
instructions below. 

 

The steps below show how to switch the configuration name of an 

engine interface from the port engine to the starboard engine.  
When all engine interfaces are configured (Configuration name 
unavailable): 
1. Press 

, use the 

 and 

  keys  to  select 

 and 

press 

.