jetway 601cfr4a 사용자 설명서
20
Introducing BIOS
The BIOS is a program located on a Flash Memory on the motherboard. This program
is a bridge between motherboard and operating system. When you start the computer,
the BIOS program gain control. The BIOS first operates an auto-diagnostic test called
POST (power on self test) for all the necessary hardware, it detects the entire hardware
device and configures the parameters of the hardware synchronization. Only when
these tasks are completed done it gives up control of the computer to operating system
(OS). Since the BIOS is the only channel for hardware and software to communicate,
it is the key factor for system stability, and in ensuring that your system performance as
its best.
In the BIOS Setup main menu of Figure 3-1, you can see several options. We will
explain these options step by step in the following pages of this chapter, but let us first
see a short description of the function keys you may use here:
is a bridge between motherboard and operating system. When you start the computer,
the BIOS program gain control. The BIOS first operates an auto-diagnostic test called
POST (power on self test) for all the necessary hardware, it detects the entire hardware
device and configures the parameters of the hardware synchronization. Only when
these tasks are completed done it gives up control of the computer to operating system
(OS). Since the BIOS is the only channel for hardware and software to communicate,
it is the key factor for system stability, and in ensuring that your system performance as
its best.
In the BIOS Setup main menu of Figure 3-1, you can see several options. We will
explain these options step by step in the following pages of this chapter, but let us first
see a short description of the function keys you may use here:
• Press <Esc> to quit the BIOS Setup.
• Press ↑↓← → (up, down, left, right) to choose, in the main menu, the option you
• Press ↑↓← → (up, down, left, right) to choose, in the main menu, the option you
want to confirm or to modify.
• Press <F10> when you have completed the setup of BIOS parameters to save these
parameters and to exit the BIOS Setup menu.
• Press Page Up/Page Down or +/– keys when you want to modify the BIOS
parameters for the active option.
3-1 Entering Setup
Power on the computer and by pressing <Del> immediately allows you to enter Setup.
If the message disappears before your respond and you still wish to enter Setup, restart
the system to try again by turning it OFF then ON or pressing the “RESET” button on
the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt> and
<Delete> keys. If you do not press the keys at the correct time and the system does not
boot, an error message will be displayed and you will again be asked to
If the message disappears before your respond and you still wish to enter Setup, restart
the system to try again by turning it OFF then ON or pressing the “RESET” button on
the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt> and
<Delete> keys. If you do not press the keys at the correct time and the system does not
boot, an error message will be displayed and you will again be asked to
Press <F1> to continue, <Ctrl-Alt-Esc> or <Del> to enter Setup
3-2 Getting Help
Main Menu