dls up1c 사용자 설명서

Car stereo / amplifier

Black -

Blue +

Red

Black -

Red +

Tweeter

Bass/mid

T

weeter

filter

9-25604

Black -

Red +

Low-pass filter

Y

ellow

When used as a tune-up tweeter to existing speakers the
filters coming with this tweeter should be connected in
series with respective speaker element as on the drawing.
Select tweeter level by connecting the red cable to either
the red or yellow cable coming out from the filter box. If the
tweeter is directed towards the listener, low level is to be
prefered. Otherwise make your own tests for best result.

Sometimes the midrange can be improved by phase reversing
the tweeter. Try it and make your own judgement.

NOTE! Some kind of highpass  filters (active or
passive) must be used. If the tweeters are connected
without filters they may be damaged and the sound
reproduction becomes bad.

Y

2 pcs 28 mm (1,1")  tweeter elements

Y

2 pcs 12 dB high-pass cable filter with level

select (not included when UP1C is a part of a
complete system)

Y

Mounting accessories for dash-

           and recessed mounting

UP1C connected to a system with an existing bass/
mid speaker with it´s own low-pass filter. This is not
the perfect filter solution. The best sound is achieved
if all filters are perfectly designed to match the
different drivers in the system.

Speaker
impedance 4

Ω

Tweeter level select:
Red to red = high
Red to yellow = low

○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Thank you for buying DLS UP1C tweeters. UP1C tweeters are
included in the DLS ULTIMATE PRO speaker kits UP5, UP6, UP35
and UP36.
They can also be bought separately for use as "tune-up tweeters"
to improve the treble in any system.

P.O. Box 13029
S-402 51 Göteborg, Sweden
Tel. +46 31 840060
Fax +46 31 844021
E-mail: info@dls.se
www.dls.se

If you have any questions about this product, contact

your local dealer or DLS customer support center.

Art.no

10-25301C

Size

28 mm / 1,1"

Nom. power (RMS)

50 Watts (80 Watts max)

Freq. range

1,5 kHz-20 kHz

Sensitivity

93 dB

X-over frequency

4 kHz with filter 9-25604

  Overall dimensions

44,5 mm / 1,75"

Magnet diameter

28 mm / 1,1"

Mounting depth

18 mm / 0,71"

Mounting hole

48 mm / 1,89"

Cone material

Hand treated fabric

You need a hole with a diameter of 48 mm / 1,89" in the door side.
The cup is attached to the door side using the metal bracket
screwed together with the cup and the bracket pressing towards
the door side back.
Put the tweeter element into the cup with the cable going out
through the bottom hole. Then attach the element into the cup and
turn it clockwise to attach to the cup. When removing the element
from the cup, turn it ccw and lift it out

UP1 can be mounted on the dashboard with the angled cup  or
recessed in a doorside with the flush cup.

For angled surface
mount together with the
angled cup:
 The tweeter element is
attached to the cup by
fitting the three wings
on the angled cup into
the tracks of the ele-
ment and then turn it
clockwise. When remo-
ving the element from
the cup, turn it ccw and
lift it up.

When used in combination with DLS UP5, UP6, UP35 or
UP36 the filter boxes in the kits should be used.

DLS Svenska AB 02-03-04