Becker grand prix 작동 가이드
77
Radio mode
Traffic programme (TP)
If an RDS diversity station broadcasts
TP announcements, it is possible to in-
terrupt CD, MP3/WMA, CDC/AUX,
MW, LW, SW mode or the mute mode
and switch the broadcast TP announce-
ments through. Moreover, you can listen
to one FM station while receiving TP an-
nouncements transmitted by another FM
station.
TP announcements, it is possible to in-
terrupt CD, MP3/WMA, CDC/AUX,
MW, LW, SW mode or the mute mode
and switch the broadcast TP announce-
ments through. Moreover, you can listen
to one FM station while receiving TP an-
nouncements transmitted by another FM
station.
There are two ways to select a TP sta-
tion:
- Automatic tracking
- Direct programming
Automatic tracking transmits TP bulle-
tins over the FM station currently being
received. If the selected FM station has
poor signal quality or is not a TP station,
the unit applies specified criteria to
search for a new TP station.
tion:
- Automatic tracking
- Direct programming
Automatic tracking transmits TP bulle-
tins over the FM station currently being
received. If the selected FM station has
poor signal quality or is not a TP station,
the unit applies specified criteria to
search for a new TP station.
Direct programming enables a TP sta-
tion to be programmed that is not the FM
station being received. This means, for
example, that a particular FM station can
be listened to whilst TP announcements
are received from another one.
If the programmed TP station’s recep-
tion is poor, the unit switches to auto-
matic tracking until the programmed TP
station can be restored.
tion to be programmed that is not the FM
station being received. This means, for
example, that a particular FM station can
be listened to whilst TP announcements
are received from another one.
If the programmed TP station’s recep-
tion is poor, the unit switches to auto-
matic tracking until the programmed TP
station can be restored.
If the unit detects a TP station, this is in-
dicated on the display by
dicated on the display by
TP
.
appears on the display to indicate
that the traffic programme is active.
Activating / quitting the TP
menu
menu
Activating:
X
Press the
button twice.
X
Press the
multifunction button.
Quitting:
X
Press the
button; otherwise the
TP menu will automatically disappear
after 8 seconds if no further operations
are performed.
after 8 seconds if no further operations
are performed.
Switching TP on / off
In all modes and wavebands, TP can be
turned on or off by pressing and holding
the
turned on or off by pressing and holding
the
button for more than 2 seconds.
TP can also be switched on or off whilst
in the TP menu:
in the TP menu: