King Technology pool frog above ground mineral system 사용자 설명서
•
Set control dial by matching up the parameters of your pool on the chart below. THIS IS A
STARTING POINT ONLY and may need to be adjusted to fit your individual pool needs. See #8
for directions. IMPORTANT: Pump run times less than 8 hours could result in under chlorination due
to inadequate flow through the System.
to inadequate flow through the System.
12
Hour Pump Run Time
24
Hour Pump Run Time
PUMP SIZE
PUMP SIZE
1/2 hp
3/4 hp 1 hp 1 1/2 hp 1/2 hp 3/4 hp 1 hp 1 1/2 hp
4.5
4
3
5
3.5
3
2.5
4
5
4.5
4
5.5
4
3.5
3
4.5
5.5
5
4.5
4
4.5
4
3.5
5
6
5.5
5
4.5
5
4.5
4
3.5
NR
6
5.5
5
5.5
5
4.5
4
7,000 (18')
9,000 (21')
12,000 (24')
15,000
20,000
Gallons
*
*
*
*
*
*
*
*
Diameter
8
Hour Pump Run Time
PUMP SIZE
1/2 hp
3/4 hp 1 hp 1 1/2 hp
5
4.5
4
3.5
5.5
5
4.5
4
6
5.5
5
4.5
NR
6
5.5
5
NR
NR
6
5.5
Above Grd.
POOL SIZE
If using another means of chlorine support
Follow steps 1-5 on page 5 then continue below.
T
est Strips
Pool
Strips
Test
and
Spa
•
Set dial to Setting 10.
Maintain a minimum chlorine
reading of 0.5 ppm with a
chlorine delivery device or hand
feeding.
reading of 0.5 ppm with a
chlorine delivery device or hand
feeding.
* – Bypass installation recommended.
NR – This pump size is not recommended for this size pool.
NR – This pump size is not recommended for this size pool.
RECOMMENDED FLOW RATE: 20-60 gpm
Start-up and Operation
12
Hour Pump Run Time
24
Hour P
PUMP SIZE
1/2 hp
3/4 hp 1 hp 1 1/2 hp
4.5
4
3
5
3.5
3
5
4.5
4
5.5
4
3.
5.5
5
4.5
4
4.5
4
NR
6
5.5
5
5.5
5
7,000 (18')
9,000 (21')
12,000 (24')
15,000
20,000
Gallons
*
*
*
Diameter
8
Hour Pump Run Time
PUMP SIZE
1/2 hp
3/4 hp 1 hp 1 1/2 hp
5
4.5
4
3.5
5.5
5
4.5
4
6
5.5
5
4.5
NR
6
5.5
5
NR
NR
6
5.5
Above Grd.
POOL SIZE
•
For the first week test the
pool water daily for free chlorine
ensure correct dial setting. Continue
to test weekly throughout the season.
ensure correct dial setting. Continue
to test weekly throughout the season.
7.
8.
•
After each testing, adjust the dial
up by 1/2 increment if the free
chlorine reading has dropped
below 0.5 ppm or adjust down by
1/2 increment if the reading has
risen above 1.0 ppm. Continue this
process each day until the free
chlorine reading stabilizes to at
least 0.5 ppm.
chlorine reading has dropped
below 0.5 ppm or adjust down by
1/2 increment if the reading has
risen above 1.0 ppm. Continue this
process each day until the free
chlorine reading stabilizes to at
least 0.5 ppm.
•
Shock pool every two weeks or as
needed to maintain water quality.
Follow label directions on the shock
treatment used.
Follow label directions on the shock
treatment used.
•
Do not add shock in or near the
skimmer or into the POOL FROG
®
Cycler as it could damage equipment,
risk potential explosion or discolor
your pool surface.
risk potential explosion or discolor
your pool surface.
9.
•
Shock pool every two weeks or as
needed to maintain water quality. Follow
label directions on the shock treatment
used.
label directions on the shock treatment
used.
•
Do not add shock in or near the
skimmer or into the POOL FROG
®
Cycler
as it could damage equipment, risk
potential explosion or discolor your pool
surface.
potential explosion or discolor your pool
surface.
Most common pool sizes
6.
7.
•
Remember to adjust dial ONLY by 1/2 setting per day in
order to prevent over chlorination which may bleach pool
surfaces.
surfaces.
4
4
Find your starting dial setting by matching up the
parameters of your pool on the above chart. An above
ground pool with approximately 12,000 gallons with a
1 horse pump running 12 hours a day would require a
ground pool with approximately 12,000 gallons with a
1 horse pump running 12 hours a day would require a
starting setting of 4.5. See example at right.