ge-interlogix simon 사용자 설명서
Simon Security System
10
To cancel an accidental alarm before the programmed dialer delay time expires, enter
your access code.
your access code.
Guidelines for Preventing Accidental Alarms
The following guidelines will go a long way toward preventing accidental alarms.
•
Close doors and widows before you leave your house.
•
Gather your belongings, so you can exit immediately after arming the system.
•
Always enter and exit within the programmed delay times.
•
Make sure you leave through a door that has a delay time set for it.
•
Disarm your system immediately upon returning home.
•
Be aware of the devices in your security system and learn how each one operates.
•
If you have pets, ask your installer if you need pet lenses in your motion detectors.
•
Check the location of your smoke detectors. Smoke detectors near bathrooms and
kitchens can be tripped by steam and smoke from cooking.
kitchens can be tripped by steam and smoke from cooking.
•
Take note of system beeps, voice announcements and indicator lights which indi-
cate the current system status.
cate the current system status.
How to Use an
Off-Site Phone
Off-Site Phone
You may use an off-site phone to arm/disarm your panel, turn lights on and off, check
system status, or conduct an audio session (ask your installer if you have this feature).
system status, or conduct an audio session (ask your installer if you have this feature).
¾
How to gain access to the Control Panel:
1.
Call the panel and let the phone ring twice then hang up.
2.
Wait at least 10 seconds and call the panel again. You may wait up to 40 seconds
before calling again.
before calling again.
3.
The panel should answer on the first ring. You won’t hear any prompt when the
system answers.
system answers.
4.
Press the * button on your telephone and you will hear system activated.
At this point you may perform the actions listed in the following table of phone com-
mands. CODE refers to the master and access codes programmed into your system.
mands. CODE refers to the master and access codes programmed into your system.
If you are interactive with your panel and the panel hangs up on you, the system is
Phone Commands
Panel Function
Phone Command
DISARM
‚
+ CODE +
1
ARM Doors/Windows
‚
+ CODE +
2
ARM Doors/Windows with No Entry Delay
‚
+ CODE +
2
+
2
ARM Motions
‚
+ CODE +
3
ARM Motions with Latchkey
‚
+ CODE +
3
+
3
ARM Doors/Windows and Motions
‚
+ CODE +
2
+
3
ARM Doors/Windows with No Entry Delay
and Motions with Latchkey
‚
+ CODE +
2
+
2
+
3
+
3
Lights On/Off
‚
+ CODE +
0
System Status
‚
+ CODE + # +
1
AVM
‚
+ CODE +
5
+
X
(
X
= a command
from the Audio Verification Set,
1=Talk, 2=VOX, 3=Listen)
Hang Up
‚
+ CODE +
9