cadsoft eagle 4.5 사용자 설명서
C. EAGLE Options at a Glance
In order to output manufacturing data, for instance, with the CAM Pro-
cessor, EAGLE can be started directly from a terminal window under
Linux or from a console window under Windows.
Since Windows programs give up their connection to the console they
Since Windows programs give up their connection to the console they
have been started from, you can use the file eaglecon.exe (located in the
demo/bin subdirectory on the CD-ROM) if you want to run the CAM
Processor from a batch file.
This version of EAGLE is exactly the same as the eagle.exe, except that it
doesn't disconnect from the console.
Type eaglecon -? for a list of CAM Processor options.
The following options are permitted:
The following options are permitted:
-Dxxx
Draw tolerance (0.1 = 10%)
-Exxx
Drill tolerance (0.1 = 10%)
-Fxxx
Flash tolerance (0.1 = 10%)
-N+
Suppress message prompts
-O+
Optimize pen movement
-Pxxx
plotter Pen (layer=pen)
-Rxxx
drill Rack file
-Sxxx
Script file
-Wxxx
aperture Wheel file
-X-
eXecute CAM Processor
-a-
emulate Annulus
-c+
positive Coordinates
-dxxx
Device (-d? for list)
-e-
Emulate apertures
-f+
Fill pads
-hxxx
page Height (inch)
-m-
Mirror output
-oxxx
Output filename/channel
-pxxx
Pen diameter (mm)
-q-
Quick plot
-r-
Rotate output 90 degrees
-sxxx
Scale factor
-t-
emulate Thermal
-vxxx
pen Velocity
-u-
rotate output 180 degrees
-wxxx
page Width (inch)
-xxxx
offset X (inch)
-yxxx
offset Y (inch)
Where:
xxx Further data, e.g. file name as with -W
or a
decimal number as with -s.
Examples:
Examples:
-W /home/user/eagle/project/aperture.whl
-s 1.25
-s 1.25
-
Default for option is off
+
Default for option is on
Example:
Example:
236
EAGLE Manual