cadsoft eagle 4.5 사용자 설명서

GRID MM;
MARK (12.5 7.125);
LAYER 21;
CIRCLE (R 0 0) (R 0 14.5);
PAD (P 40 0);
PAD (P 40 120);
PAD (P 40 240);

This examples shows how to set the reference point at position (12.5

7.125). Then a circle with a radius of 40 mm is drawn in layer 21, tPlace.

Three pads are placed on the circumference with an angle of 120°.
Right Mouse Click:

The > character within parenthesis represents a right mouse click. That

way one can move a whole group, for example:

MOVE (> 0 0) (10 0);

The previously selected group will be moved 10 units in x direction.
Modifier:

Within parenthesis one can use some modifiers. For combinations you

don't have to care about the order:

represents the pressed Alt key, the alternativ grid

represents the pressed Ctrl key

represents the pressed Shift key

relativ coordinates

polar coordinates

right mouse click

C and S cause miscellaneous commands to behave in different manners.

More information can be found in the help function of the respective

command.

If the commands are being read from a script file, each one must be

closed with a semicolon. In the above cases the semicolons can be omit-

ted if the commands are being entered via the keyboard and each is be-

ing closed with the Enter key.

A component in the Layout Editor is to be transposed to a specified

position.

GRID MM 1;
MOVE IC1 (120 25) ;

Alternatively:

MOVE (0.127 2.54) (120 25);

IC1 is located at coordinates (0.127 2.54) and is moved to position

(120 25). The current position of a device can be obtained with the aid

of the INFO command.

EAGLE Manual