Pentax ist d 작동 가이드

• Misuse of the battery can cause hazards such as leakage, overheating, 

explosion, etc. The battery should be inserted correctly with regard to polarity (+ 

and -) marked on the battery and the camera.

• Battery performance may be temporarily hindered in low temperatures, but will 

recover in normal temperatures.

• Keep a spare battery on hand for replacement convenience when shooting 

outdoors or while traveling.

• If the built-in flash is used continuously, the battery may become warm, but it 

does not mean that the battery is faulty; it is one of the battery's characteristics.

• Replace the batteries at the same time. Do not mix battery brands, type or an old 

battery with a new one. It may cause explosion or overheating.

• Always confirm that the camera is working properly when the camera has not 

been used for a long time, or before important occasions (weddings, trips, etc.). 

PENTAX is not responsible for consequential damages (costs incurred for 

photography, lost profits, etc.) arising from failure of this product.

• Do not clean the product with organic solvents such as thinner, alcohol, or benzene.

• Do not subject to high temperatures or high humidity. Do not leave the camera in 

a vehicle, as the temperature can get very high.

• Do not store the camera with preservatives and chemicals. Storage in high 

temperatures and high humidity can cause molding. Remove from case and 

store in a dry and well-ventilated location.

• This camera is not waterproof, and cannot be used in the rain or where the 

camera could get wet.

• Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion 

to protect the camera from vibrations of motorcycles, automobiles, or ships.

• The temperature range for camera use is 0°C to 40°C.

• The LCD display may appear black under high temperatures, but will return to 

normal as temperatures normalize.

• The LCD display may respond more slowly at low temperatures. This is due to 

liquid crystal properties, and is not a fault.

• Periodic inspections are recommended every one to two years to maintain high 

performance.

• Sudden temperature changes will cause condensation on the inside and outside 

of the camera. Place the camera in your bag or a plastic bag, retrieving the 

camera after decreasing the temperature difference.

• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These 

could cause a camera breakdown. Wipe dry any rain or water drops on the camera.

• Use a blower or lens brush to remove dust accumulated on the lens or viewfinder. 

Never use a spray blower for cleaning as it may damage the lens or viewfinder screen.

• See “Precautions When Using a CF Card” (p.151) for details on the compact 

flash memory card (CF Card).

• Please do not press forcefully on the LCD monitor. This could cause breakage or 

malfunction.

e_000_kb321.book  Page 2  Wednesday, August 27, 2003  12:09 PM