Pentax K-3 작동 가이드
3
Sh
47
You can set the position and range of the autofocusing area
(AF area).
1
Set [AF Mode] to g or h.
2
Press c.
3
Select the AF area.
Use the frame that appears
on the monitor to change the
position and size of the AF area.
Available operations
4
Press E.
The AF area is set.
t
Memo
• When [Focus Peaking] is set to [ON] in [Live View] of the A3
menu, the outline of the subject in focus is emphasized and
makes it easier to check the focus. This function works in both
v
and
w
modes.
You can precisely fine tune your lenses with the camera’s
autofocus system.
1
Select [26. AF Fine Adjustment] in E4 menu
and press D.
The [26. AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
3
Select [Setting] and adjust
the value.
Available operations
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
t
Memo
• Check focus accuracy by magnifying the image during Live
Selecting the Desired Focusing Area
ABCD
Changes the position of the AF area.
R
Increases/reduces the size of the AF area
(when
g
is selected).
M
Returns the AF area to the center.
OK
OK
AF Fine Adjustment
E
4
Apply All
Applies the same adjustment value to all
lenses.
Apply One Saves an adjustment value for the lens being
used. (Up to 20 values)
D
/R to the right
Adjusts the focus to a closer
position.
C
/R to the left
Adjusts the focus to a farther
position.
M
Resets the adjustment value
to the default setting.
AF Fine Adjustment
AF Fine Adjustment
26.
26.
Apply All
Apply All
2
2
Setting
Setting
Setting
±0
±0
±0
±0
Cancel
Cancel
OK
OK
e_kb502_om.book Page 47 Monday, October 14, 2013 4:14 PM