Panasonic PPDTH42LRG20B 작동 가이드
Identifying Controls
Quick Start Guide
9
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
MENU
Open the main menu
EXIT
Exit the menu system and return to
the normal viewing screen
the normal viewing screen
Move the cursor / select the menu item
Move the cursor / adjust levels /
select from a range of options
select from a range of options
Access the menu / store settings after adjustments
have been made or options have been set
have been made or options have been set
RETURN
Return to the previous menu
ON SCREEN HELP Instructions box - Operation guide
(example: Owner ID)
Owner ID
EXIT
RETURN
Please enter new PIN
PIN
*
* * *
PIN entry
0
9
Operation guide will help you.
Changes the input mode
Headphones
jack (p. 64)
jack (p. 64)
CI Slot
(p. 48)
(p. 48)
TV
Mains power On / Off switch
•
Use to switch mains power On / Off.
If TV was switched off whilst in Standby mode, using the
Mains Power On / Off switch, then it will be in Standby mode
when switched back on using the same switch.
If TV was switched off whilst in Standby mode, using the
Mains Power On / Off switch, then it will be in Standby mode
when switched back on using the same switch.
For changing TV channel up or down. When a function
is selected by the ‘F’ button, press to increase or
decrease the setting of the selected function. When in
Standby mode, press either button for about 1 second
to switch the TV On.
is selected by the ‘F’ button, press to increase or
decrease the setting of the selected function. When in
Standby mode, press either button for about 1 second
to switch the TV On.
Function select
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass (“Music” or “Speech” mode in the
Sound Menu) / Treble (“Music” or “Speech” mode in the
Sound Menu) / Balance / Auto Setup (p. 36 and p. 37)
Sound Menu) / Treble (“Music” or “Speech” mode in the
Sound Menu) / Balance / Auto Setup (p. 36 and p. 37)
SD Card slot
(p. 50)
(p. 50)
Auto power standby function
The TV will automatically go to Standby mode in the following conditions:
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
“Off Timer” is active in the Setup Menu (p. 17)
•
no operation is performed for the period selected in “Auto Standby” (p. 32)
•
This function does not affect Ext Rec. of Timer Programming and Direct TV Recording.
This function does not affect Ext Rec. of Timer Programming and Direct TV Recording.
Power and Timer LED
Red
: Standby
Green: On
Orange: Timer Programming On
Orange (flash): Ext Rec. of Timer Programming or Direct TV Recording in progress
Red with orange flash: Standby with Timer Programming On or Direct TV Recording
Orange: Timer Programming On
Orange (flash): Ext Rec. of Timer Programming or Direct TV Recording in progress
Red with orange flash: Standby with Timer Programming On or Direct TV Recording
The LED blinks when the TV receives a command from the remote control.
Remote control signal receiver
•
Do not place any objects between the TV remote control signal receiver and remote control.
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality when “C.A.T.S.” in the Picture Menu is set
to “On” (p. 28).
to “On” (p. 28).